Auto-zone-control-systems Prism 2 Graphical Interface Technical Guide (Versi Manual de usuario Pagina 23
- Pagina / 52
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
STEP 7: CONFIGURING UNITS
Prism 2 Technical Guide
23
Configuring Units
Select <Setpoints> to view each setpoint screen associated with
the control type. You must have a Level 3 passcode to access most
of the setpoints on these screens.
Select
<Trendlogs> to open the normal trend log screen and
perform whatever task you normally would from that screen.
Select <Print> to send the printout to a preview window where you
can then select the printer. The printout will be in text format with
a list of the important status information.
Select <Cancel Force Modes> to immediately cancel all force
modes. Force Modes will automatically cancel on their own 10
minutes after Prism 2 goes Off Line.
Controller Override, Schedule, and Holiday
Confi guration
At the top of the status screen next to the Occupied/Unoccupied
indicator are the buttons < Override>, < Schedule>, < Holidays>,
and <ALARM>.
The <Override> button overrides the current occupied/unoccupied
operating mode. The <Schedule> button accesses the weekly
schedule and the <Holiday> button accesses the holiday schedule.
The <ALARM> button accesses the Unit Alarm Status &
Confi guration Screen, discussed on page 27.
Controller Overrides
If the controller supports it, you can override the
schedule mode of operations by clicking on the
<Override> button. The Overrides Window will
appear.
You can choose
Force Schedule
ON or Force Schedule OFF or
you can choose Fan Only Mode
to force the Main Fan to operate
without any cooling or heating
being activated due to space
temperature demands.
A scheduled force override will
remain in effect until cancelled.
To cancel an override, select the
Auto Scheduling option.
NOTE: Not all units support the Fan Only Mode. In
these cases, it will not be displayed as an option.
Controller Weekly Time Schedules
When you select the <Schedule> button, the
Schedules Window will appear.
The Schedules Window in the example shows an 8:00 AM to 5:00
PM operating schedule for Monday through Friday. The bars on
the right side of the screen give a visual indication of the selected
time periods.
NOTE: Some controllers do not have two start/stop events per
day. The Schedules Window will refl ect this by having the Event
#2 columns grayed out.
When you enter a time in any fi eld, you must designate AM or PM
and press <ENTER>.
NOTE: You MUST press <ENTER> to have the system accept
your entry. If you do not press <ENTER>, the bar graph to the
right will either not display or will not change.
The holiday start and stop times will override the standard
operating hours. The holidays themselves are scheduled in the
Holiday Schedule Window described on page 24.
To eliminate a schedule from any event, simply type a zero and
press <ENTER> for the Start and Stop time for that day. The screen
will display 12:00 AM for both the Start and Stop times, indicating
that the equipment will not activate for that day.
If you want the controller to run the full 24 hours, type a zero and
press <ENTER> to set 12:00 AM for the Start time and type 11:59
PM and press <ENTER> for the Stop time. This ensures the full 24-
hour period will remain in the occupied mode without interruption.
Select < Save> to save your schedule. Select < Restore> to restore
a previously saved schedule. Select < Copy to All> to copy the
schedule to all like controllers, and select < Erase Schedules> to
completely erase the schedule appearing in the window.
- Graphical Interface 1
- Technical Guide 1
- TABLE OF CONTENTS 2
- OVERVIEW 4
- Step By Step Guide 4
- Terms and Conventions 4
- Step By Step Guide Map 4
- STEP 1: PRISM 2 INSTALLATION 5
- Installing Prism 2 5
- Communications 5
- Prism 2 Main Screen 6
- STEP 2: JOB-SITE SET-UP 10
- Job-Site Set-Up 10
- Job-Site Setup 11
- Prism 2 Technical Guide 13
- Auto-Logging 14
- Configuring Prism 2 16
- Modem Connection 18
- TCP/IP Connection 18
- CommLink Setup 19
- Unit Search 20
- Loops and Units 21
- STEP 7: CONFIGURING UNITS 22
- Configuring Units 22
- Configuring Zone Controllers 22
- STEP 8: CONFIGURING ALARMS 27
- Configuring Alarms 27
- STEP 9: POLLING FOR ALARMS 28
- Step 9: Alarm Polling 28
- Alarm Polling 28
- Trend Logging 29
- Printing Trend Logs 30
- Tenant Override Logging 32
- Overview 33
- Creating a Sample Screen 34
- Creating a sample screen 34
- Miscellaneous Edit Functions 36
- Placing a Jump Field 36
- Placing a Jump Field 36
- Placing an Image 37
- Selection 37
- Placing an Image 37
- Hot Spots 38
- APPENDIX A - SCREEN EXAMPLES 40
- DEMOMODE Setup and Operation 41
- DEMOMODE Setup and Operation 41
- System Manager TS 42
Relacionado con productos y manuales para Equipo Auto-zone-control-systems Prism 2 Graphical Interface Technical Guide (Versi
Equipo Auto-zone-control-systems Auto-Zone CV-C Controller Installation Guide (Vers Manual de usuario
(42 paginas)
(42 paginas)
Equipo Auto-zone-control-systems IP Module Kit Installation Guide for the IP Module Manual de usuario
(20 paginas)
(20 paginas)
Equipo Auto-zone-control-systems CommLink 5 Technical Guide, Installation Instructi Manual de usuario
(16 paginas)
(16 paginas)
Equipo Auto-zone-control-systems Remote Link II Technical Guide, Installation Instr Manual de usuario
(20 paginas)
(20 paginas)
Equipo Auto-zone-control-systems Auto-Zone CV & CV-EX Systems Installation & Manual de usuario
(120 paginas)
(120 paginas)
Equipo Auto-zone-control-systems CommLink IV Technical Guide, Installation Instruct Manual de usuario
(20 paginas)
(20 paginas)
Equipo Auto-zone-control-systems Auto-Zone Plus Systems Installation & Operatio Manual de usuario
(210 paginas)
(210 paginas)
Equipo Auto-zone-control-systems ZoneView Plus Software Manual (Version 01C) Manual de usuario
(62 paginas)
(62 paginas)
Silverline 3-in-1 Detector Compact manuali
Manuali dei proprietari e guide per l'utente per Strumenti di misura Silverline 3-in-1 Detector Compact.
We fornisce 1 manuali pdf Silverline 3-in-1 Detector Compact per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentarios a estos manuales